BoseProfessional.com
Package Contents
× 2
Product Dimensions
232 mm
9.1 in
Technical Specifications
For additional specifications, see the DesignMax DM3SE technical
data sheet at BoseProfessional.com.
Physical
Product Dimensions
Net Weight, Loudspeaker with
grille and bracket (single)
Shipping Weight (pair)
Installation Guide • DesignMax DM3SE
× 2
172 mm
6.8 in
156 mm
6.1 in
Height: 232 mm (9.13 in)
Width: 154 mm (6.06 in)
Depth: 156 mm (6.12 in)
2.8 kg (6.1 lb)
7.2 kg (16.0 lb)
× 2
154 mm
6.0 in
Ø 5.5 mm
0.22 in
Important Installation Information
It is the installer's responsibility to ensure installation of the loudspeakers and mounting
system is performed in accordance with all applicable codes, including local building
codes and regulations. Consult the local authority having jurisdiction before installing
this product.
It is the responsibility of the installer to ensure the safety of the loudspeaker installation.
Failure to properly install the loudspeaker could result in damage, injury, or death.
This product is not intended for installation or use in indoor water facility areas
(including, without limitation, indoor pools, indoor water parks, hot tub rooms, saunas,
steam rooms and indoor skating rinks).
The hardware for securing the loudspeaker to the mounting surface is not supplied.
Consult a building professional for the proper mounting hardware before installing the
loudspeaker.
Do not block any ventilation openings. Install in accordance with the manufacturer's
instructions.
Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produces heat.
Do not mount on surfaces that are not sturdy, or that have hazards concealed behind
them, such as electrical wiring or plumbing. If you are not sure about installing the
bracket, contact a qualified professional installer. Ensure the bracket is installed
according to local building codes.
Do not expose loudspeaker or mounting components to any chemical substances that
are not specified by Bose Professional, including but not limited to lubricants, cleaning
agents, contact sprays, or other hydrocarbon-based solvents. Exposure to such
substances can lead to degradation of the plastic material, resulting in cracking and
creating a falling hazard.
Overview
× 2
155 mm
6.1 in
120 mm
4.7 in
182 mm
7.2 in
English • 3