Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
EN-4
4.2 Troubleshooting
For technical issues contact an Authorized Ohaus Service Agent. Please visit our website www.ohaus.com to locate the
Ohaus office nearest you.
5. TECHNICAL DATA
The technical data is valid under the following conditions:
Indoor use only
Operating temperature: -10º C to 40º C
Relative humidity: 10% to 90% relative humidity, non-condensing
Altitude: Up to 2000 m
Power: AC Adapter (supplied) - 12 VDC 0.84 A output, internal rechargeable sealed lead-acid battery
Mains supply voltage fluctuations: up to ± 10% of the nominal voltage
Installation Category: II
Pollution Degree: 2
Specifications:
MODEL
Capacity x Readability
(Max x d non-approved)
Maximum Displayed Resolution
Capacity X Readability
(Max x e approved)
Approved Resolution
Repeatability
Linearity
6. COMPLIANCE
Compliance to the following standards is indicated by the corresponding mark on the product.
Mark
Standard
This product complies with the EU Directives 2014/30/EU (EMC), 2014/35/EU (LVD) and 2014/31/EU
(NAWI). The EU Declaration of Conformity is available online at www.ohaus.com/ce.
This product complies with the EU Directive 2002/96/EC (WEEE). Please dispose of this product in
accordance with local regulations at the collecting point specified for electrical and electronic equipment.
For disposal instructions in Europe, refer to www.ohaus.com/weee.
Verified weighing instruments
When the instrument is used in trade or a legally controlled application it must be set up, verified and sealed in accordance
with local weights and measures regulations. It is the responsibility of the purchaser to ensure that all pertinent legal
requirements are met.
Weighing Instruments verified at the place of manufacture bear the following supplementary metrology marking on the
descriptive plate.
Weighing Instruments to be verified in two stages have no supplementary metrology marking on the descriptive plate. The
second stage of conformity assessment must be carried out by the applicable weights and measures authorities.
If national regulations limit the validity period of the verification, the user of the weighing instrument must strictly observe the
re-verification period and inform the weights and measures authorities
As verification requirements vary by jurisdiction, the purchaser should contact their local weights and measures office if they
are not familiar with the requirements.
V41PWE1501T
V41XWE1501T
1.5 kg x 0.0002 kg
3 kg x 0.0005 kg
1500 g x 0.2 g
3 lb x 0.0005 lb
48 oz x 0.01 oz
7500
1.5 kg x 0.0005 kg
1500 g x 0.5 g
3 lb x 0.001 lb
48 oz x 0.02 oz
3000
0.0005 kg
± 0.0005kg
V41PWE3T
V41XWE3T
6 kg x 0.001 kg
3000 g x 0.5 g
6 lb x 0.001 lb
15 lb x 0.002 lb
96 oz x 0.02 oz
240 oz x 0.05 oz
6000
3 kg x 0.001 kg
6 kg x 0.002 kg
3000 g x 1 g
6 lb x 0.002 lb
15 lb x 0.005 lb
96 oz x 0.05 oz
240 oz x 0.1 oz
3000
0.001 kg
± 0.001kg
TM
Valor
4000 Series
V41PWE6T
V41PWE15T
V41XWE6T
V41XWE15T
15 kg x 0.002 kg
6000 g x 1 g
15000 g x 2 g
30 lb x 0.005 lb
480 oz x 0.1 oz
6000
15 kg x 0.005 kg
6000 g x 2 g
15000 g x 5 g
30 lb x 0.01 lb
480 oz x 0.2 oz
3000
0.002 kg
± 0.002kg
7500
3000
0.005 kg
± 0.005kg
Advertenties
Inhoudsopgave
