Spa Pump Equipotential Bonding Terminal - Bestway Lay-Z-Spa Majorca Handleiding
Inhoudsopgave
Beschikbare talen
Beschikbare talen
SPA PUMP EQUIPOTENTIAL BONDING TERMINAL
It is recommended to arrange for a qualified electrician to connect
the spa pump to an equipotential bonding terminal using a
minimum 2.5mm
When inflating, you will notice that air will be expelled
from the area where the air hose connects to the
pump, this is normal for technique requirements.
Important: Don't cover the holes on the base of the
inflation hose. This operation will over inflate the liner
and damage the structure.
Do not use an air compressor to inflate the pool.
Do not drag the pool on rough ground as this may cause damage to the pool liner.
Inflation time for reference only.
solid copper conductor.
2
17
Hoofdstukken
Inhoudsopgave
Probleemoplossen
