Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Customizing the PIN code
If you have just activated the PIN code, follow the stages described be-
low.
Alternatively, you must copy the steps 1 and 2 of the initialisation pro-
cess as well as the steps 1 and 2 of the activation process before perso-
nalising the PIN code.
Please remember that the personalisation of the PIN code can only be
set once the initialisation and activation of the PIN code has been com-
pleted.
On
1- When
appears, press
2- The 0000 code appears and the fi rst number blinks. Press
to select the fi rst desired number then press
exit. Repeat this operation for remaining 3 numbers.
3- Press
to confi rm. The new code is now saved.
4- Press again on
to exit setting PIN code mode and go back to the
home display of the installer settings.
To exit the Installer settings, press
RESTORING FACTORY SETTINGS
If the PIN code protection is disabled, the user and installer settings are
re-initialized:
1- From the PIN code setting, press
display.
M16MI328 A01_01/18
for at least 5 seconds.
5 sec.
to save and
1
2
twice.
rest
.
appears briefl y on the
NO
2-
fl ashes. Press
yes
= Factory settings reset
NO
= Factory settings not reset
3- Press the key
for 5 seconds. The device returns to its initial confi -
guration and goes back automatically to the home display of the ins-
taller settings.
or
The following factory values will be eff ective:
Settings
Comfort setting temperature
Boost duration
Keypad lock
Backlighting
Eco mode temperature lowering-
level
Frost protection temperature
Super Comfort
Minimum set of Comfort setting
temperature
Maximum set of Comfort setting
temperature
Maximal Boost duration
Maximum ambient temperature
for the automatic stop of the
Boost
Temperature unit
Automatic open window
detection
Occupancy detection
Dual optimization feature
PIN code protection
Value of the PIN code
To exit the user settings, press
YES
or
to select
.
Factory settings
Operation
19°C
60 min.
Disabled
User settings
L3
-3,5°C
7°C
Enabled
7°C
30°C
60 min.
39°C
°C
Installer settings
Enabled
Enabled
Opti comfort
Disabled
0000
twice.
EN
5 sec.
18
Advertenties
Hoofdstukken
Inhoudsopgave
