CAUTION!
Do not try to close the
appliance door within 2
minutes after automatic
opening. This can cause
damage to the appliance.
AirDry is automatically activated with all
programmes excluding
applicable).
The duration of the drying phase and the
door opening time vary depending on the
selected programme and options.
To improve the drying performance refer
to the XtraDry option or activate AirDry.
CAUTION!
If children have access to
the appliance, it is advised to
deactivate AirDry as opening
the door may pose a danger.
How to deactivate AirDry
Make sure the appliance is in user mode.
1. Press Delay.
• The indicators
7. OPTIONS
Desired options must be
activated every time before
you start a programme.
It is not possible to activate
or deactivate options while a
programme is running.
(if
and
are off.
• The indicator
• The display shows the current
setting:
= AirDry activated.
2. Press Delay to change the setting:
= AirDry deactivated.
3. Press on/off to confirm the setting.
6.5 Factory reset
Factory reset restores the factory
defaults. Before the reset, make sure the
appliance is in user mode.
Press and hold Start and Option for 5
seconds.
The displays shows _ _ _ for about 5
seconds.
The appliance returns to programme
selection mode.
Factory reset does not reset
the cycle counter.
6.6 Cycle counter
You can view the number of completed
dishwashing cycles in the cycle counter.
1. Press the on/off button to activate the
dishwasher. Make sure that the
appliance is in programme selection
mode.
2. Press and hold Start and Option for
5 seconds.
The displays shows uC and then the
number of cycles.
Press any button to exit the cycle
counter.
After reaching 65535, the
cycle counter restarts.
The option button toggles
between the available
options and their possible
combinations.
ENGLISH
37
still flashes.