Download Print deze pagina

Technoline WS 9069 Handleiding pagina 9

Advertenties

Beschikbare talen
  • NL

Beschikbare talen

  • DUTCH, pagina 22
minutes.
Press the SET button again, the "°C" is flashing. Press the + button to set temperature
measuring unit to °C or °F.
Press the SET button again, the "°C" is flashing. Press the + button to set temperature
measuring unit to °C or °F.
Press the SET button again, the "FAC" is flashing. Press and hold the + button if you want to
reset the station to factory settings.
Press the SET button to confirm and exit the setting. You will return to the normal display
mode.
Notes:
If no buttons are pressed within 15 seconds, set mode will time out and return to normal
display mode, reflecting whatever adjustments were made by user before the set mode timed
out.
Press the + button once to adjust setting value by 1 unit, hold the button to speed up the
setting.
DEW Point, MAX and MIN values
In normal display mode, press the MAX/MIN/RESET button to view the MIN values of indoor
temperature, outdoor temperature and pool temperature.
Press the MAX/MIN/RESET button again to view the MAX values of indoor temperature,
outdoor temperature and pool temperature.
Press the MAX/MIN/RESET button again view the dew point value instead of indoor
temperature. "DEW POINT" will be displayed at the display.
Press the MAX/MIN/RESET button again to return to normal display mode.
Notes:
Press and hold the -/MAX/MIN button to clear MAX and MIN values from memory.
After 30 seconds without pressing a button the display will return back to the normal display
mode.
Hereby, Technotrade declares that this product WS 9069 is in compliance with the essential
requirements and other relevant provisions of Directive 2014/53/EU and ROHS 2011/65/EC. The
original EU declaration of conformity may be found at: www.technoline.de/doc/4029665090696
Specifications
Transmission frequency:
Maximum transmission power TX33-IT:
Maximum transmission power TX52D-IT:
Precautions
This main unit is intended to be used only indoors, the outdoor sensors are to be used
outdoors.
Do not subject the unit to excessive force or shock.
Do not expose the unit to extreme temperatures, direct sunlight, dust or humidity.
Do not immerse in water.
Avoid contact with any corrosive materials.
Do not dispose this unit in a fire as it may explode.
Do not open the inner back case or tamper with any components of this unit.
Batteries safety warnings
Use only alkaline batteries, not rechargeable batteries.
Install batteries correctly by matching the polarities (+/-).
868 MHz
-0.82 dBm
9.03 dBm
EN4

Advertenties

loading