Dremel 910 Vertaling Van De Originele Gebruiksaanwijzing pagina 5
Inhoudsopgave
Beschikbare talen
Beschikbare talen
•
Squeeze trigger (3) to apply glue onto
re
desired surface.
•
Apply parts together.
•
Allow glue to cool before handling object or
surface.
TIP: Dremel also supplies glitter and colour
sticks for decorative purposes. These sticks
have been specially developed for creative
projects and low temperature (105 °C).
The colour sticks can also be used for sealing
decorations. To be able to quickly change
colours, it is recommended to cut the sticks into
3 cm pieces before inserting into the Glue Gun.
GLUESTICKS
g.
Glue
GG01
GG02
GG03
GG04
GG05
GG11
GG13
e
DRIP-CONTROL FUNCTION
When heated up, the glue gun has a
,
drip-control function. This prevents the glue
der
from dripping when the glue gun is at operating
e
temperature.
NOTES: During heating-up the glue gun may
release a few drops of glue.
Do not use glitter or colour sticks at high
temperature. The drip-control function will not
work properly.
Model 940: EXCHANGE NOZZLE
•
Use a spanner and turn the nozzle from
the housing.
•
Mount a new nozzle on the housing.
ad
Model
910
165°C
Multipurpose glue, 7mm
Multipurpose glue, 7mm
-
Woodglue, 7mm
Glitter glue, 7mm
-
Colour glue, 7mm
-
Multipurpose glue, 11mm
-
Woodglue, 11mm
-
CHANGING GLUE STICKS
Do not attempt to remove the unused portion of
the glue stick from your glue gun. If you need
to switch glue stick formulas, empty the melting
chamber by squeezing the trigger and insert
new formula.
STAND / KICK STAND
When glue gun is hot, do not lay on its side.
Always use stand.
•
Push stand (4) into "down" position when
temporarily not in use (models 910, 920
and 930).
•
Push the stand release button (8) to
release the stand (model 940).
When re-using or storing, push stand back into
"up" position.
920 930 940
165°C
195°C
105°C
105°C
-
-
-
BEFORE ANY WORK ON THE UNIT ITSELF,
-
-
PULL THE MAINS PLUG.
Always keep the unit clean so that it functions
-
properly and accurately.
-
-
-
This DREMEL product is guaranteed in
accordance with statutory/country specific
-
-
regulations; damage due to normal wear and
tear, overload or improper handling will be
excluded from the guarantee. If the unit should
fail despite the care taken in manufacturing and
testing, send it undismantled together with proof
of purchase to your dealer.
For more information on the Dremel
assortment, support and hotline, go to www.
dremel.com
Dremel, Konijnenberg 60, 4825 BD Breda, The
Netherlands
7
MAINTENANCE
CLEANING
SERVICE AND WARRANTY
CONTACT DREMEL
Inhoudsopgave
