Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
5
Storing
• The board must be cleaned properly after use. To do
this, use a solution of mild soap and clean water. Make
sure that all sand, pebbles, oil and dirt are removed.
• Put the board in the shade and allow it to dry.
• Remove the cap from the inflation valve.
• Press the push-push
mechanism on the in-
flation valve and turn it
a quarter turn to open
the inflation valve (low
position).
• Fold/roll the board towards the inflation valve to re-
move all air.
• Do not fold/roll the board too tightly.
• Replace the cap on the inflation valve.
• Store the board in a cool, dry and ventilated place.
n
ote
- Never allow the board to dry in direct sunlight.
c
aution
- Tight folding/rolling can damage the air seams and the
EVA foam.
9
Next level leisure
6
Prolonging the lifespan
- Avoid over and underpressure due to temperature
fluctuations; ensure constant operating pressure.
- Avoid using an air compressor; use a suitable pump.
- Prevent dirt or water from entering through the infla-
tion valve.
- Avoid delamination or deformation due to exposure to
direct sunlight or high temperatures.
- Prevent damage by exceeding the maximum load ca-
pacity (people and/or load).
- Avoid long-term storage, as this has a detrimental ef-
fect on the air chamber's glue seams.
- Avoid dragging the board along the ground, as sharp
parts have a detrimental effect.
- Clean the product using a solution of mild soap and
clean water after use.
- Dry well after use.
- Check the seams of the air chamber regularly for weak
spots; repair if necessary.
- Check the inflation valve regularly for leaks; tighten it
if necessary.
n
ote
- To prevent air leakage, tighten the inflation valve from
time to time. Use the tool provided for this purpose.
Fully deflate the board and remove the cap from the
inflation valve, grab the internal part of the inflation
valve on the underside of the board, insert the tool
into the inflation valve and turn clockwise until it is fully
tightened.
If the product has reached the end of its life,
check locally how it can be disposed of in a
responsible manner.
EN
Advertenties
Inhoudsopgave
Probleemoplossen
