Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Copyright UNOLD AG | www.unold.de
10. Place the kettle level on the base.
11. Switch on the appliance by pressing the switch on lower side of the ket-
tle downward. If the kettle is not correctly seated the appliance cannot be
switched on.
12. When the water boils, the appliance automatically shuts off.
13. For hygienic reasons, please discard the water from the first boiling.
OPERATION
5.
Close the lid until it clicks into place. The locking prevents accidental
opening.
6.
Place the kettle level on the base in order to establish the contact with the
power connection.
Stand 17.10.2022
4.
Check to make sure that the appliance is sta-
ble.
5.
Connect the base via the power cord to the
power supply (220–240 V~, 50 Hz/60 Hz).
6.
Remove the kettle from the base.
7.
Remove the kettle from the base to fill it with
water. Press the two buttons in the middle of the lid
(see Fig.). The lid will unlock and it can be taken
off.
8.
Add clear, cold water to the "Max" marking.
9.
Close the lid by pressing lightly.
1.
Remove the kettle from the base.
2.
Remove the kettle from the base to fill it with
water. Press the two buttons in the middle of the lid
(see Fig.). The lid will unlock and it can be taken
off.
3.
Fill the kettle with water (minimum 0.5 litres,
mark MIN, maximum 1.5 litres, mark MAX).
4.
CAUTION! If the kettle is overfilled, boiling
water may be ejected!
DE
EN
FR
NL
IT
ES
PL
19 von 64
Advertenties
Inhoudsopgave
