Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Installation
The Cool-Eco is a mobile airconditioning/dehumidifying units that can be moved
from room to room. Install as follows:
• Remove all packaging material, keep
it away from children and ensure that
the unit remains in an upright
position.
• Before use, check that all accessories
are present and that there is no
damage to the accessories or the unit
itself. Do not use a damaged unit;
take it back to your supplier!
• Place the unit on a sturdy, flat, dry
and horizontal base near an electrical
socket and a discharge point for hot air, e.g. a window that can be opened
slightly. Make sure that the unit has at
• least 30 cm of free space on all sides and take all safety instructions into
account.
Installation to dehumidifier
To use the dehumidification function, connect the water drainage hose to the water
drainage point (high) (see picture). This hose should lead to a bucket or drain. The
hose should not run upwards! Your unit is now ready for use.
Installation to cool
• In order to use the cooling function, you do
not need to connect the water drainage hose.
Check that the sealing caps of the water
drainage connections are in place.
• Install the window panel in the window.
Adjust the length of the window panel to the width or height of the window and
secure it with the dowels. The length of the window panel is adjustable from
67.5 to 123 cm.
45
Advertenties
Inhoudsopgave
