Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
5. Technical data
DX 460 GR tool
Weight
Tool length
en
Recommended maximum fastening rate
Cartridges
Power regulation
Right of technical changes reserved
6. Before use
aa
6.1
Tool inspection
● Ensure that there is no cartridge strip in the tool. If
there is a cartridge strip in the tool, remove it by hand
from the tool.
● Check all external parts of the tool for damage at reg-
ular intervals and check that all controls operate prop-
erly. Do not operate the tool when parts are damaged or
when the controls do not operate properly. If necessary,
have the tool repaired at a Hilti service centre.
● Check the buffer and piston for wear (see "8. Care
and maintenance").
6
Printed: 12.08.2013 | Doc-Nr: PUB / 5069839 / 000 / 02
All manuals and user guides at all-guides.com
3.85 Kg (8.49 lb)
478 mm (18.8")
700 per hour
6.8/11 M (27 cal. short) green, yellow, red, black
4 cartridge power levels, regulation wheel with locking
function
6.2 Choosing the right fastener guide / piston / fas-
tener combination
Use of the wrong combination may present a risk of
injury. Damage to the tool may also result or fastening
quality may be negatively affected.
Advertenties
Hoofdstukken
Inhoudsopgave
