English
Thank you for purchasing the Clean Air Optima® 2in1: Dehumidifier & Air Purifier
CA-704 / CA-707.
We wish you many years of healthy indoor air with this efficient and effective product. Ensure
that all safety precautions are followed when using this electrical appliance for the proper
operation of the device. These instructions describe the safety precautions to be observed
during operation. They are meant to prevent injuries and to avoid damaging the device.
Description
This Clean Air Optima® device consists of the following main components:
1 . Oscillation louver
2. Control panel
3. Air outlet and Ionizer position
4. Color LED monitor indicates relative humidity in blue (below 60%), green
(between 60% - 80%) and red (above 80%)
5. Caster wheels
6. Handle
7. Air inlet
8. Water tank
9. UV-C Lamp
10. Air inlet and filter frame compartment, includes: Pre-filter, Activated Carbon Filter,
True HEPA H13 Filter
11. Continuous drain port
12. Back cover
13. Power cord
After the dehumidifier has been delivered/moved, it must be left static for at least two
hours before it is switched on. Since the compressor line in the dehumidifier contains
refrigerant, the refrigerant must flow for at least two hours after the move before it re-
turns to its original position.
Safety warnings
This device may only be used in accordance with this safety instructions. Take the following
steps to minimize the risk of personal injury caused by for example electric shocks or fire.
1. Leave the device to stand for at least two hours before use, especially after
transportation.
2. Only for indoor use. Do not use or store outdoors.
3. Use proper voltage: AC 220V – 240V, 50Hz.
4. Allow a free space of min. 20 cm around the air inlet and air outlet of the device.
5. The appliance is not intended to be used by children or persons with reduced physical,
sensory or mental capabilities, unless they are supervised by a person responsible
for their safety.
4