Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
MODELS ST1500 and ST3000
The multifunctional LCD remote control features a
10 m long lead fitted on one end with a 5-pin XLR
connector for connection to the smoke machine.
1) LCD display
2) FUNCTION button
3) UP/DOWN buttons
4) TIMER button
5) VOLUME button
6) MANUAL button
As soon as the smoke machine is switched on and
the remote control is connected, the message
"Warming Up" is displayed. After about 15 minutes,
once the heating element has reached the right temperature, the
message "Ready to Fog" is displayed.
The FUNCTION button (2) lets you browse through the different
settings which are as follows: "Interval Set" – "Duration Set" – "
Timer Out" – "Volume Out" and "DMX add"
-
"Interval Set"; sets the interval period between the smoke
emissions in TIMER mode. It is set via the UP/DOWN buttons
(3) between 1 and 200 seconds.
-
"Duration Set"; sets the duration of the smoke emission in
TIMER mode between 1 and 200 seconds.
-
"Timer Out" sets the volume of the smoke in percentage in
TIMER mode between 1 and 100%.
-
"Volume Out" sets the volume in percentages in VOLUME
mode between 1 and 100%.
-
"DMX Add" sets the start address A for the DMX control
between 1 and 512 (see DMX settings). The B address is the A
address +1.
As soon as "Ready to Fog" is displayed, you can use the smoke
machine in one of the three ways:
All manuals and user guides at all-guides.com
Advertenties
Inhoudsopgave
