Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
MAINTENANCE AND FILTER REPLACEMENT (SEE PAGE 3)
• Make sure the unit is turned off and unplugged before any manipulation.
• Do not immerse the device in water or any other liquid.
• Do not use corrosive, abrasive or flammable products to clean the unit.
• The particulate filter is not washable and needs to be replaced.
CLEANING THE FABRIC PRE-FILTER
Removable fabric pre-filter captures dusts and animal hair and dander. It is to be washed
about every 15 days, in order to guarantee the effectiveness of the purifier. You can wash it
with a vacuum cleaner along with a soft brush. You can also put it in the washing machine, on
a program for "delicate fabrics".
Caution: Don't iron the pre-filter. Never place a pre-filter that is still wet on the device. Only the
pre-filter is reusable and can be cleaned with water.
AIR INLET AND OUTLET OF THE DEVICE
The air is aspired from the back of the unit and comes out at the top. Use a soft cloth to remove
dust from the air inlets and outlets.
FILTER REPLACEMENT
Thanks to OptiFilter
technology, an indicator light turns on when the filter has to be replaced
TM
(every 6 to 12 months). To replace the filter:
Make sure the unit is unplugged, then remove the pre-filter from the unit and unclip the rear
1
grille.
Gently pull the two tabs on the used filter out of the machine.
2
Place the used filter directly in a bag and throw it quickly to avoid dispersing contaminants.
3
Carefully install the new filter, placing both tabs facing you.
4
Replace the rear grille and the pre-filter.
5
Reconnect and turn on the device.
6
Press the [ Filter ] button for 3 seconds to reset the filter wear measurement system.
7
Avoid used filters being handled by people with asthma or allergies. Remember to wash your
hands after handling a used filter.
CLEANING THE AIR QUALITY SENSOR
The particle sensor requires regular dusting: every 2 months, depending on the frequency of
use and the environment in which the device is placed. To do this, use a vacuum cleaner to
capture any dust.
Caution: Do not use detergents, corrosives or metal objects to clean the sensor. The efficiency
of the sensor is susceptible to decrease if it's not cleaned regularly.
STORAGE OF THE DEVICE
If you don't use your air purifier, you can store it in a clean place, away from moisture and heat.
18
All manuals and user guides at all-guides.com
FAQ
Problem
The appliance
does not work
Drop in the
appliance
performance
Abnormal noise
The appliance
does not
produce air
The air coming
out of the
appliance smells
bad
The color of
the air quality
indicator doesn't
change
Reason
Solution
> The product is not correctly
plug or there is an electrical
> Plug the socket correctly and
problem.
check the voltage and the good
functioning of your electrical
> There is a problem on the
system.
electrical system of your
house.
> The filter and/or the
> Push and engage the grille
rear grille is not properly
correctly.
engaged.
> The pre-filter is dirty, which
> Clean the pre-filter
hinders the airflow.
> Leave at least 50 cm space
> The air inlet or outlet is
behind, on the sides and in front
blocked by something.
of the unit.
> Please see "Maintenance"
> The air quality sensor is dirty.
paragraph.
> Something obstructs the
> Make sure that no object
fan.
obstructs the air flow.
> The device has a
> Contact your reseller for service
functioning problem.
support.
> Please see "Maintenance/
> The filter is dirty.
Replacement of the filter"
paragraph.
> Please see "Maintenance"
> The air inlet or outlet is
paragraph and make sure no
obstructed.
objects are blocking the airflow.
> Please see "Maintenance/
> The filter needs to be
Replacement of the filter"
cleaned or replaced.
paragraph.
> Please see "Maintenance"
> The air quality sensor is dirty.
paragraph.
> You are not in a very
> To change to orange or red, the
polluted environment.
ambient air must be polluted.
> The filter must be replaced
> Please see "Maintenance"
if the light remains red.
paragraph.
19
Advertenties
Inhoudsopgave
