Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
a
b
c
d
a
Hold function
b
Battery status
c
Measured value display
d
MIN or MAX value
during the measurement
3
Continuous measurement / Hold
For continuous measurement
activate the laser (see figure)
and keep the button pressed.
Measurement procedure notice
This infrared temperature instrument detects the temperature of
various surfaces and materials. A built-in sensor head detects the
material-specific infrared rays emitted by every object. The amount of
these emissions is determined by the material's emission coefficient
(0 ... 1). This instrument is permanently set to an emission coefficient
of 0.95, which is applicable to most organic materials as well as
plastics, ceramics, wood, rubber and stone. Please ensure that the
space between the instrument and surface to be measured is free of
disturbances (steam, gas, contamination, glass).
Laser
The laser is a targeting aid to
sight the location for the infrared
measurement. Only the surface's
temperature is measured. Set the
optimum measuring distance for
the measured spot (12:1) such that
it is completely within the target
object.
08
EN
e
f
Laserstrahlung! Nicht in den
Strahl blicken. Laserklasse 2
< 1 mW · 650 nm · EN 60825-1:2014/AC:2017
ThermoSpot One
Rev18W38
g
e
Laser beam switched on
f
Unit of measurement °C
g
MIN/MAX switching
h
Laser output
i
ON / Measure
Release the button as soon
as the target laser pinpoints
the measurement location.
The measured value is held.
h
i
Advertenties
Inhoudsopgave
