Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
USE
Before you use the appliance: plug in the appliance and turn on the on/o昀昀 switch at the back of the device.
The heater is now in stand-by mode. You can set the appliance using the control panel, but also using
the remote control. You can make the settings in the same way. The display will show you the selected
settings.
ON/OFF SWITCH
Push the on/o昀昀 switch to turn on or o昀昀 the appliance. A signal will indicate that the appliance is operating.
After switching o昀昀, the appliance will cool itself for a while. The heater remembers the last settings made.
So when you switch on the device again, the last made settings will appear on the display.
POWER SETTING
Push once the button: high power: 2500 W
·
Push twice the button: low power: 1500 W
·
SETTINGS
Timer
1.
Push once this button to set the timer.
2.
The timer can be set between 1 and 12 hours. Use the + and - button to select the desired time. By
pressing the + or - button you set the time with one hour more or less. You can also press and hold
this button until you reach the desired setting.
When the selected time has been expired, the appliance will enter the stand-by mode and will no
3.
longer emit heat.
Temperature
1.
Press twice this button to set the temperature.
Temperature can be set between 5°C and 35°C. Use the + and - button to select the desired
2.
temperature. By pressing the + or - button you set the temperature one degree higher or lower. You
can also press and hold this button until you reach the desired setting.
If you have set the timer and temperature, press the settings button a third time. Now, the display will
show the ambient temperature. Now the settings are 昀椀xed and you can not adjust them unless you push
this button again to set the timer or temperature.
Note: if both the timer and temperature are set, both settings will appear alternately on the display.
ECO MODE
Push this button to enter eco mode. This function ensures that the set temperature will be maintained in
an as energy-e昀케cient way as possible.
If the ambient temperature is maximum 2°C lower than the set temperature, the appliance will make
·
sure that the set temperature is reached at the lower power of 1500 W.
If the ambient temperature is more than 2°C lower than the set temperature, the appliance will make
·
sure that the set temperature is reached at the higher power of 2500 W.
If the temperature is reached, the appliance will enter the stand-by mode. If the temperature is
decreasing again, the appliance will re-enter the eco-mode.
www.domo-elektro.be
27
DO7344H
Advertenties
Inhoudsopgave
