Advertenties
Beschikbare talen
Beschikbare talen
Quick Links
Product introduction
Power port
LED light
Inflation port
Power switch
Heat
HEPA filter
dissipation
Dust
Vacuum cleaner
collection
Accessories
Charging
Valve
Pouch
cables
Adapters
Instructions for use
Wireless vacuum cleaner
Wireless inflation pump
to start the machine
1. Long press
1. Long press
1. Long press
to start the machine
and press
then press
and press
to select the mode
to select the mode
2. The screen display is shown in the following
figure, and then press
to vacuum
2. Long press
3. Press the
4. Press the
Installation and use of accessories
1. Press the SOS key to
turn on and off the lights
2. Connect the air tube to the
inflation port and press the open button
Disassembly and cleaning
1. Rotate the dust collection bin counterclockwise and remove it from the body
2. Remove the filter screen from the dust collection bin and pour the garbage into the trash can
3. If necessary, a slightly damp cloth or disposable tissue can be used to clean the dust cup. The filter screen can
be rinsed with water, and it should be thoroughly dried before use
4. Rotate clockwise to install the dust collection bin, place the filter screen into the bin, and tighten it in the
opposite direction according to step 1
Cleaning nozzles
Air tube
to power on
to select mode
to select the adjustment unit
keys to adjust the preset tire pressure
key to inflate
Technical specifications
Size
5.5 * 5.5 X 29 CM
478g
Gross weight
Material
ABS
Power
60W
Battery capacity
4000 mAh
Max inflation flow
25L/min
Max '' pressure
140PSI
Type-C
Charging port
Suction power
4000PA
Vacuum/inflation
20 min / 40 min
Note!
1. Before use, check if the plug, hose, and dust bag are abnormal. If there are any abnormalities, do not
use them
2. If smoke, sparks, or burnt odors are found during use, the power switch should be immediately
turned off and the use stopped
3. Avoid using in damp environments (such as bathrooms)
4. Before use, be sure to clean the garbage inside the dust storage bin. Excessive garbage in the dust
storage bin or clogged suction pipes may cause the motor to overload and burn out.
Manual
Carstick Pro
time
Advertenties
Samenvatting van Inhoud voor Custom Carstick Pro
- Pagina 1 3. Press the keys to adjust the preset tire pressure 4. Press the key to inflate Carstick Pro Installation and use of accessories Technical specifications 1. Press the SOS key to turn on and off the lights Size 5.5 * 5.5 X 29 CM...
- Pagina 2 3. Druk op om de bandenspanning te wijzigen 4. Druk op om op te pompen Carstick Pro Installatie en gebruik van accessoires Technische specificaties 1. Druk op de SOS-toets om lichten aan en uit te doen Formaat 5.5 * 5.5 X 29 CM...
- Pagina 3 3. Appuyez sur pour modifier la pression des pneus 4. Appuyez sur pour gonfler Carstick Pro Installation et utilisation des accessoires Spécifications techniques 1. Appuyez sur la touche SOS pour allumer les lumières et enlève-le Format 5.5 * 5.5 X 29 CM...