• Warning! Batteries may not be charged or
reactivated by other means, nor may they be dis-
assembled, thrown onto a fire, or short-circuited.
• Always store batteries out of reach of children.
• Do not use any rechargeable batteries!
• Cleaning and user maintenance may not be
performed by children without supervision.
• Clean the batteries and the device contacts as
necessary and before inserting the batteries.
• Do not expose the batteries to extreme condi-
tions (e.g. radiators or direct sunlight). Other-
wise there is an increased risk of leakage.
• Warning. Used batteries must be disposed of
immediately. Keep new and used batteries out
of the reach of children. Seek medical help
immediately if you suspect that batteries have
been swallowed or ingested.
Danger!
• Handle a damaged or leaking battery with
extreme care and dispose of it immediately as
per regulations. Wear gloves for this.
• If you come into contact with battery acid,
wash the affected area with soap and water.
If battery acid gets into your eye, rinse it
out with water and seek medical treatment
immediately!
• The terminals must not be short-circuited.
Inserting and replacing bat-
teries (fig. B)
WARNING! Comply with the following
instructions in order to prevent mechani-
cal and electrical damage.
To insert and replace the batteries (2) proceed
as shown in fig. B.
Note: You will need a suitable screwdriver (not
included in delivery).
Note: Pay attention to the plus/minus polarity
of the batteries and their correct installation.
The batteries must be located entirely inside the
battery compartment.
Assembly (fig. C)
Assemble the product as shown in fig. C.
Use (fig. C)
1. Pour the soap bubble liquid (3) into the
opening (1a) in the product (1) provided for
this purpose.
Note: Take care that your child does not put
anything into the opening in the product.
Note: Only an adult can fill up the product.
Comply with the maximum fill capacity (see
technical data).
2. Press the button (1e) to switch the product on.
Soap bubbles then come out of the product.
3. Press the button again to switch the product
off.
Storage, cleaning
When not in use, always store the product dry,
clean, without batteries, and at room tempera-
ture.
Only clean the product with a damp cloth and
wipe dry afterwards.
Empty the product after using it each time and
let it dry out completely to prevent the formation
of mould.
IMPORTANT! Never clean the product with
harsh cleaning agents.
GB/IE
9