Preparing For Use; Basic Settings; Light Settings - Franke Fs Glt Gebruikershandleiding
Inhoudsopgave
Beschikbare talen
Beschikbare talen
EN
PREPARING FOR USE
Keep the display and keypad clean.
Z
X
The device is supplied with a battery that is only
partially charged.
Charge batteries fully before initial operation.
X
X
The initial charging takes approximately 8-10 hours.
Adapt the basic settings to your needs.
X
X
BASIC SETTINGS
Light settings
Turning on the light
Press
briefly.
X
X
The light turns on remembering the last
„
„
settings.
Light brightness gradient mode
Press
.
X
X
The brightness changes continuously.
„
„
If the desired brightness is achieved, press
X
X
again.
OPERATION
Switching on the scale
Ensure that there is no weight on the weighing
X
X
pan.
Press
briefly.
X
X
The display illuminates. All symbols appear on
„
„
the display.
After 2 seconds, the value 0 appears on the
„
„
display. The symbols
same time.
If necessary, press
X
X
Weighing
Put the weight on the weighing pan.
X
X
The weight value appears on the display when
„
„
it is stable.
All manuals and user guides at all-guides.com
and
appear at the
to zero.
FS GLT
If the lightboard will not be used in short time
Shut off the power supply.
X
X
If the low battery symbol appears on the upper
left corner
Recharge the batteries.
X
X
Only use the power adapter delivered by Franke to
X
X
recharge the batteries.
After long-period of non-utilization (> 1 year)
Charge the lithium batteries for about 12 hours
X
X
and check if they work.
If the lithium batteries do not work: Do not use
X
X
the appliance. Do not change the batteries. Do
not charge the batteries. Contact a Specialist.
Light color gradient mode
Press
.
X
X
The color changes continuously.
„
„
If the desired color is achieved, press
X
X
Turning off the light
Press
for 3 seconds.
X
X
The current setting of the lighting mode are
„
„
memorized. The light turns off.
Zeroing the scale
The weight on the weighing pan weighs less than 10%
of the max. capacity.
In stable mode, press
X
X
The value 0 and the symbol
„
„
display.
Taring
The weight on the weighing pan weighs more than or
exactly 10% of the max capacity.
Press
.
X
X
The symbol
„
„
Take off the weight from the pan.
X
X
– 6 –
again.
.
appear on the
appears.
Inhoudsopgave
