EINHELL TC-PG 10/E5 Originele Handleiding pagina 21
Inhoudsopgave
10. Troubleshooting
Fault
Engine does not
start
Generator has too
little or no
voltage
All manuals and user guides at all-guides.com
Possible cause
Automatic oil cut-out has not
responded
No fuel
Controller or capacitor defective
Overcurrent circuit-breaker has
triggered
Air fi lter dirty
GB
Check the oil level, top up with engine
oil
Refuel
Contact your dealer
Actuate the circuit-breaker and
reduce the consumers
Clean or replace the fi lter
- 21 -
Remedy
Inhoudsopgave
