Advertenties
Settings - Tone/pulse dialing - Hook/Flash - PABX - PIN
Tone/pulse dialing
P
1. Press
and then
2. Enter one of the following three codes:
a. Code "10" for tone dialing
b. Code "11" for pulse dialing (33% M/B)
c. Code "12" for pulse dialing (40% M/B)
3. Press
P
to store the settings.
4. Enter another code or press
Note:
Nowadays, most telephone connections use tone dialing.
Hook/Flash
You can set the flash key to different flash times. The flash setting usually does
not have to be altered when the telephone is connected to a larger telephone
system (see the operating manual for the telephone system).
P
1. Press
and then
2. Enter the four-digit unit PIN "XXXX" (the default PIN code for the
telephone is "0000").
3. You can now enter one of the following codes:
a. Code "700" sets the flash time to "90 ms",
b. Code "701" sets the flash time to "110 ms",
c. Code "702" sets the flash time to "130 ms",
d. Code "703" sets the flash time to "260 ms" or
e. Code "704" sets the flash time to "600 ms".
P
4. Press
to store the settings.
5. Enter another code or press
44 English
All manuals and user guides at all-guides.com
#
to quit the settings menu.
P
*
to quit the settings menu.
P
Advertenties
