Inhoudsopgave
Advertenties
EN
Use
ATTENTION!
■
Do not use the device if the warming cushion is still damp. The warming
cushion must be completely dry before it may be switched back on again.
■
If you have any health concerns, consult your doctor before using the device.
■
The warming cushion must not be folded up or covered when it is switched on. Do
not place the mains cable or the control unit on or under the warming cushion during
operation.
■
For the power supply, use only the mains cable which is also supplied.
1. Connect the mains cable (3) to the connecting socket (2) on the warming cushion (1).
2. Wrap the warming cushion (1) around your shoulders and fi x it in place with the press
button (5).
Leave the press button (5) open if you are using the device in bed and might
potentially fall asleep!
3. Connect the plug to an easily accessible plug socket which corresponds to the
technical data of the device (see the "Technical Data" chapter). The display (6) lights
up for a short time. The operating lamp (9) is lit up permanently.
4. Switch on the device by pressing the On / Off switch (8). A "1" appears on the
display (6) and the device starts to heat up. The device has 6 different heating
levels:
5. Press the button repeatedly for setting the temperature (7) until the heating level you
want is displayed.
The device has an automatic switch-off function and switches off after around
90 minutes of continuous operation.
6. Switch off the device by pressing the On / Off switch (8). The display (6) goes out. The
operating lamp (9) remains lit up until the device is disconnected to the mains power.
7. Remove the plug from the plug socket. The operating lamp (9) goes out.
8. Disconnect the mains cable (3) from the device.
9. Allow the device to cool down before you store it away or wash it.
Level 1 and 2
Level 3 and 4
Level 5 and 6
16
Low temperature
Medium temperature
High temperature
Advertenties
Hoofdstukken
Inhoudsopgave
