Inhoudsopgave
Advertenties
Use a suitable silicone adhesive to fill the gap
4.
between the work surface and the ceramic plate.
Before a skin forms on the silicone adhesive,
smooth it with a scraper, or your finger, wetted with
soapy water.
Notes
¡ Do not use the appliance until the silicone adhesive
has cured.
¡ If you use an unsuitable silicone adhesive on natural
stone work surfaces, it may cause discolouration. A
suitable adhesive can be obtained from our cus-
tomer service.
18.7 Removing the hob
Disconnect the appliance from the power supply.
1.
Cut the seal around the ceramic plate.
2.
Push out the hob from below.
3.
Installation instructions en
47
Advertenties
Inhoudsopgave
