Dell Precision 3460 Small Form Factor Servicehandleiding pagina 53
Verberg thumbnails
Zie ook voor Precision 3460 Small Form Factor:
- Servicehandleiding (99 pagina's) ,
- Installatiehandleiding (22 pagina's)
Bezel van het optisch station
Removing the optical-drive bezel
Prerequisites
1. Follow the procedure in
2. Remove the
side
cover.
3. Remove the
front
bezel.
4. Remove the
optical
drive.
About this task
NOTE:
Depending on the configuration ordered, your computer may not have an optical drive installed.
The following image indicates the location of the optical-drive bezel and provides a visual representation of the removal
procedure.
Figure 1. Removing the optical-drive bezel
Steps
1. Insert an unfolded paperclip into the emergency eject pinhole of the optical drive to open the drive tray.
2. Using a plastic scribe press down the tab that secures the optical-drive bezel to the optical drive.
3. Lift the optical-drive bezel away from the optical drive.
Installing the optical-drive bezel
Prerequisites
If you are replacing a component, remove the existing component before performing the installation process.
About this task
The following image indicates the location of the optical-drive bezel and provides a visual representation of the installation
procedure.
Before working inside your
computer.
Onderdelen verwijderen en plaatsen
53
