Hama 00039677 Handleiding pagina 4
g Operating Instruction
Package contents:
1x USB 2.0 hub
1x operating instructions
1x USB cable
System requirements:
• Operating system Windows 2000 from SP 3,
XP from SP 1, Vista, 7 or Mac OS 10.x
• Free USB connection, preferably USB 2.0
Safety instructions:
You have acquired a high-quality, electronic accessory for
your computer which is universally useable. Please observe
the following points:
• Protect the device against pressure and impact.
• Do not expose the device to moisture. The precision
contacts can be damaged.
• To not connect the device if the device, the
connection lead or the mains adapter are damaged.
• The device or other components must only be
repaired in a specialist shop or in a service centre.
• Only use the enclosed USB connection cable without
extension. Otherwise, the data security can be affected.
• Make sure that all connected devices are CE-marked.
• Avoid heat sources and direct sunlight exposure.
• Attention! Keep electrical equipment and electronic
devices out of reach of children.
• Attention! Keep packaging materials out of reach of
children! Danger of suffocation!
Putting into operation:
1. Switch on your PC and wait until it has started up.
Connect the USB hub with your PC/notebook by
means of the enclosed USB cable.
2. Please make sure that no terminal device is
connected when you install the USB hub.
Note: When connecting and disconnecting the USB hub
and the USB devices, different messages can appear on
your screen. Contact a specialist or consult the manual
of your computer or operating system if you have any
questions.
3. Now you can connect your USB peripheral devices
(e.g. printer, scanner etc.) to the USB hub.
When installing the devices you have to install every
devices separately, i.e. please wait until the drivers of the
respective device have been completely installed before
installing another device.
4. It is also recommendable – as far as this is possible –
to supply the terminal devices which are connected to
the hub with power of their own.
Note: When connecting the USB hub, you do not have
to install drivers (are included in the operating system
Windows 2000 from SP3, XP from SP1, Vista or
Mac OS 10.x). A driver may be necessary for the
connected USB devices.
This one can be obtained from the manufacturer of the
respective device or when purchasing such a device.
Card Reader: MicroSD
Caution:
Make sure that the data transfer has ended before you
remove the memory card from the card reader. Always use
the function "Eject" (click right on the card reader drive
where the memory card is insert, then click on "Eject") of
the Explorer in order to remove the memory card.
If you want to use the Card reader with another operating
system than those listed above, please check first if you can
find more information or drivers in the service area at www.
hama.de.
Support and contact information
If products are defective:
Please contact your dealer or Hama Product Consulting if
you
have any claims.
Internet/World Wide Web:
Product support or product information can be found at
www.hama.com
Support hotline – Hama Product Consulting::
Tel. + 49 (0) 9091 – 502-115
Fax +49 (0) 9091 – 502-272
e-mail: produktberatung@hama.de
3
