Klarstein ALPBACH Handleiding pagina 32
EN
32
To be observed before installation
Your appliance is a wall-mounted, recessed and/or mantelpiece-mounted appliance.
Choose a suitable location that is not sensitive to moisture and is not near curtains,
furniture or high-traffic areas.
Minimum distance to combustible materials (measured from the glass front)
Downwards:
500 mm
To the sides:
300 mm
Wall installation
Due to the many different materials used in different walls, it is strongly recommended
that you consult your local contractor before fixing this unit to the wall.
1.
Choose a location that is not susceptible to moisture and is at least 900 mm away
from combustible materials such as curtains, furniture, bedding, paper.
2. Place the wall bracket (C) on a soft surface.
3. Position the wall bracket (C) on the wall and mark the position of the four screw
holes. Use a spirit level to ensure that the wall bracket is straight. Drill four screw
holes with an electric drill. Drive the 4 dowels (F) into the holes in the wall with a
wooden hammer. Then hang the wall brackets again and fix them with four screws
4.2*40 mm (D).
Upwards:
1000 mm to
ceiling
