2-Drain the water in the tank
3-If there is lint accumulation in the funnel of
the water tank, clean it under running water.
4-Place the water tank into its seat.
For the condenser;
Hot and humid air in the condenser is cooled
with the cold air from the room. Thus,
the humid air circulating in your dryer is
condensed and then pumped into the tank.
C
Clean the condenser after every 30 drying
cycles or once a month.
To clean the condenser:
1. If a drying process has been carried out,
open the door of the machine and wait until
it cools down.
2. Unlock the 2 condenser locks after opening
the kick plate.
All manuals and user guides at all-guides.com
3. Pull out the condenser.
4. Clean the condenser by applying
5. Place the condenser in its housing. Fasten
6. Close the kick plate cover.
33 EN
pressurized water with a shower armature
and wait until the water drains.
the 2 locks and make sure that they are
seated securely.