goes out.
Slowly pout the water into a cup or similar container.
●
Put the unit back onto the base station.
●
IMPORTANT!
If requested, you can re-boil the water by pressing the on/off switch again. Wait with it ap-
prox. 30 seconds after the unit has automatically switched off.
BOIL-DRY AND OVERHEAT PROTECTION
This unit has been fitted with a dry-out and overheat protection. If it should happen that you op-
erate the unit without water or with too little water, the unit will switch off. Wait for a short moment
until the unit has cooled down. Fill the unit with water and continue as usual.
LIFT-OFF SHUTDOWN
Should you remove the unit from the base station during the boiling process, the unit will switch
off itself. This is the so-called lift-off shutdown.
CLEANING OUTSIDE
Remove the plug from the socket and let the unit cool down. Use a soft and moist cloth to clean
the outer surfaces of the unit. Use a mild detergent in case of heavy soiling.
Clean the unit and never hold the base station under running water and never immerse it into
water.
REMOVAL OF STAINLESS STEEL ANTI-LIMESCALE FILTER
The removable stainless steel anti-limescale filter prevents that limescale and dirt particles are
poured out along with the water. For simple cleaning, the stainless steel anti-limescale filter can
be removed.
Remove the filter when the electric kettle has cooled down.
●
Reach behind the silver-coloured ring of the filter with your finger and pull it out backwards.
●
Clean the scale filter under running water.
●
For placing, press the scale filter into the outlet from the inside.
●
22