Getting Familiar With Your Clipper And Accessories; Taking Care Of Your Clipper - Oster 078006 Handleiding
Inhoudsopgave
Beschikbare talen
Beschikbare talen
GETTING FAMILIAR WITH YOUR CLIPPER AND
Your clipper comes to you with several parts and accessories. Confirm that they are all present and are not damaged. All parts can be
purchased from an Oster™ authorized service center.
Clipper
j
On/Off Speed Switch
k
Hanging Ring
l
Power Cord
m
Oster™ Clipper & Blade Lube™ Oil
n
Cleaning Brush
o
Blade Guard
p
Blade Assembly
q
Nameplate
r
TAKING CARE OF YOUR CLIPPER
Note: Any other maintenance not explained in this manual must be
performed by an Oster™ Authorized Service Center.
Important: Make sure clipper is turned off and unplugged from
electrical outlet before removing, replacing or cleaning any part.
Removing Blade Assembly from the Clipper
Push locking button u (078006 Model ONLY) in and hold. Push blade
assembly v upwards to position w . Blade assembly can now be
removed from clipper by pulling forward and upwards at x . before
removing, replacing or cleaning any part.
WARNING
When pushing the blade assembly back into
the clipper it must be inserted with the smooth
side of the blade facing upwards. If the blade
is not positioned with the correct side facing
upwards, damage to the clipper or injury may
result.
Blade Care, Cleaning and
Lubricating-Daily
Blades should be oiled regularly to reduce
heat and maintain sharpness. Before
removing the blade, be sure it has cooled
down.
With clipper in off position apply 1 or 2
drops of Oster™ Clipper and Blade Lube™
oil on the blade. Wipe excess oil with a dry,
soft cloth.
All manuals and user guides at all-guides.com
ACCESSORIES
BLADE CARE
Cleaning
Clean the excess hair from your blades
by using the cleaning brush.
English-2
Due to continuous product improvement, product
may vary slightly from what is illustrated.
Step 1
078006 Model ONLY
Inhoudsopgave
