WIFICDPC10xx
Indoor doorbell for Wi-Fi video doorphone
Description
1. Status indicator
2. Pairing button
Reset button
3. USB plug (power)
Safety
•
To reduce risk of electric shock, this product should only be
opened by an authorized technician when service is required.
•
Disconnect the product from the mains and other equipment if
a problem should occur.
•
Read the manual carefully before use. Keep the manual for
future reference.
•
Only use the device for its intended purposes. Do not use the
device for other purposes than described in the manual.
•
Do not use the device if any part is damaged or defective. If the
device is damaged or defective, replace the device immediately.
Use
1. Power the doorbell using a USB adapter (not included) close to
the video doorphone. After installation, you can relocate the
doorbell.
2. Open the app "Nedis SmartLife" on your mobile device.
3. Tap the video doorphone to open the interface.
4. Open the menu by clicking the button in the top right corner.
5. Open "Ring settings" in the menu to add the indoor doorbell.
6. Press the pairing button (on each doorbell to be connected).
The status indicator starts flashing.
7. Tap "Add" in the app. The status indicator stops flashing. You can
set the ringtone and the volume.
8. Test the device by pressing the doorbell button on the video
doorphone.
9. Relocate and power the doorbell anywhere else within a range
of 50 m from the video doorphone.
Cleaning and maintenance
Warning!
•
Do not use cleaning solvents or abrasives.
•
Do not clean the inside of the device.
•
Do not attempt to repair the device. If the device does not
operate correctly, replace it with a new device.
•
Clean the outside of the device using a soft, damp cloth.
Support
If you need further help or have comments or suggestions please
visit www.nedis.com/support
Contact
Nedis B.V., Reitscheweg 1, 5232 BX 's-Hertogenbosch,
The Netherlands - service@nedis.com
1
English