Cleaning & Maintenance; Troubleshooting - Inventum Kv1808W Handleiding
Inhoudsopgave
Beschikbare talen
Beschikbare talen
5
cleaning & maintenance
Before cleaning the appliance, switch it off by removing the plug from the socket.
Clean the interior of the appliance. Use warm soapy water with, for instance, washing-up liquid, all-purpose cleaner or
soda in order to prevent nasty smells. Wipe the inside of the appliance after cleaning with clean water and properly wipe
everything dry. Leave the appliance to dry for 1 to 2 hours.
The shelves, drawers and door compartments can be removed from the appliance easily and washed by hand. These
components may never be cleaned in the dishwasher.
Clean the outside of the appliance and the door rubbers with a soft damp cloth. The grill of the condenser at the rear of the
appliance can be cleaned with a vacuum cleaner with soft brush attachment.
DEFROSTING
The freezer section of this appliance is free from frost - no-frost. If used correctly, no ice will be formed.
If an ice layer is created after all, defrost the freezer section when the ice layer has reached a thickness of 3 mm. Remove
all products from the freezer section. Store the frozen products on a cool location, packaged in newspapers and blankets.
Remove the plug from the socket and keep the door of the cooler section closed while defrosting the freezer section.
Defrost the freezer section Defrosting can be accelerated by placing a tray with hot water in the freezer section. Do not use
sharp metal objects to scrape the freezer section clean, use a plastic ice scraper.
Clean and dry the freezer section. Insert the plug in the socket and set the thermostat to the required setting. Place the
frozen products back in the freezer section once it has reached the required temperature.
Warning Never remove ice with sharp objects, defrosting sprays, a hair dryer, a heater or something similar.
This could lead to unsafe situations and cause irreparable damage to the appliance
Replacing the LED lamp
This appliance has been provided with a LED lamp. This lamp lasts for a longer period of time. When the
LED lamp in the appliance is broken, you are not able to replace it yourself. Contact the Inventum service
LED
LED
department.
6
troubleshooting
Breakdown
Appliance does not do anything;
led does not light up
Temperature in the appliance is
too high or too low
Appliance makes noise
Remark: bubbling and expansion noises in the cooling circuit are normal.
Cause
Plug not in socket
Incorrect thermostat setting
Ventilation openings are blocked
Is the appliance properly installed?
Does the rear of the appliance make
contact with something?
Solution
Insert the plug in the socket.
- Set the thermostat to the correct position
- Check whether the MIN or MAX position
has been set for the freezer section.
Clean the ventilation openings
Check the installation
Check this and move the appliance forward
21
English
•
Inhoudsopgave
