AEG LF628600 Gebruiksaanwijzing pagina 46
Beschikbare talen
Beschikbare talen
• Spoelstop option
8
Temperatuur touch button
9
Aan/Uit push button
6.2 Display
A
B
C
7. DIAL AND BUTTONS
7.1 Aan/Uit
Pressing this button for a few seconds allows
to activate or deactivate the appliance. Two
different tunes sound while switching the
appliance on or off.
As the Stand-by function automatically
deactivates the appliance to decrease the
energy consumption in a few cases, you may
need to activate the appliance again.
The default selected programme, at
machine switch on, is always the Eco
40-60 programme, also after wake up
from standby.
For more details, refer to Stand-by paragraph
in Daily Use chapter.
46
ENGLISH
D
E
A.
The digital indicator can show:
• Programme duration (e. g.
• Delay time (e. g.
• Cycle end (
• Warning code (e.g.
• Indication of total operating hours of
the appliance. Refer to the "Operating
hours counter" section in the
"Settings" paragraph for more details.
B.
Extra rinse indicator. It lights on
when this option is selected .
C.
This indicator blink during the laundry
load detections.
D.
Child safety lock indicator.
E.
Door locked indicator.
7.2 Introduction
The options/functions are not selectable
with all washing programmes. Check the
compatibility between options/functions
and washing programmes in the
"Programme Chart". An option/function
can exclude another one, in this case the
appliance doesn't allow you to set the
incompatible options/functions together.
Make sure the screen and touch buttons
are always clean and dry.
7.3 Temperatuur
When you select a washing programme, the
appliance automatically proposes a default
temperature.
Set this option to change the default
temperature.
The indicator
= cold water of the set
temperature comes on (the appliance does
not heat the water).
).
).
).
).
