3.3 To stop the product
Figure 3
1
Pull out the power cable to stop the product.
(A)
2
Remove the motor unit. (B)
3
Remove the lid. (C)
4
Remove the blade unit and pour the processed
food into a container. (D)
4
Storage
● Pull out the plug and wind the cable around the
product when not in use.
● Store the product in a cool and dry place away from
children.
6
Troubleshooting
Problem
The product does not start.
The blade unit does not move.
The product emits an abnormal
smell, heat or smoke.
7
Disposal
7.1
To discard the product
● Make sure that you follow local regulations when you
discard the product. Do not burn the product.
5
5.1
before cleaning.
or flush the product - risk of electric shock. Do not use
abrasive detergent.
a risk of personal injury.
● Refer to the table for instructions on how to wash the
different parts off the product. (Figure 4)
● Some food can discolour plastic parts. Rub with a
cloth dipped in vegetable oil to remove stains.
Possible cause
The power button is not pushed down.
The power cable is not plugged in.
The bowl or accessory is not correctly
attached.
There is too much food in the bowl.
The food is blocking the blade unit.
There is too much food in the bowl.
The product has operated for too long
without a pause to cool down.
The food is too hot.
8
Specification
Voltage
Output
Volume
Cable length
Dimensions
Maintenance
To clean the product
Warning! Stop the product and pull out the plug
Warning! Do not use water or other liquids to soak
Warning! Handle the blade unit with care, there is
Push the power button.
Plug in the power cable.
Make sure that the bowl or
accessory is correctly attached.
Reduce the amount of food.
Stop the product, pull out the plug,
and clear the blockage.
Reduce the amount of food.
Do not operate the product longer
than 1 minute.
The temperature of the food must
not exceed 60°C.
Contact the retailer.
Technical data
Action
Value
230 V ~ 50 Hz
280 W
1000 ml
1 m
157 x 238 x 179 mm
EN
SV
NO
PL
DE
FI
FR
NL
9