MSA ALTAIR PRO Handleiding pagina 18
Beschikbare talen
Beschikbare talen
OPERATION
3.2.
Turning ON the Instrument
Before the instrument can be used for monitoring possible toxic gases in
the atmosphere, it must be commissioned (" Fig. 4).
(1) Press and hold the button for 3 seconds.
ON
!
"
" displays during this time period.
The Steel Mill version cannot be turned OFF without removing the battery
or using MSA FiveStar
!
An LCD functional test activates all display indicators.
!
Acoustic alarm sounds, alarm LEDs light up and vibration alarm is
triggered.
The software version is displayed for approx. 3 seconds.
!
!
The gas type is displayed for approx. 3 seconds more (O
LO
!
and
approx. 3 seconds.
STL
!
approx. 3 seconds.
TWA
!
approx. 3 seconds.
During the display of
corresponding setpoints can still be changed (" Fig. 4).
(2) If Calibration Due (
(default is
CAL
!
"
!
If calibration is due, "
The instrument beeps and flashes "
instrument calibration is performed.
!
If calibration is not due, the hourglass, number of days to calibration, and
DAYS
"
(3) User is prompted for a Fresh Air Setup (FAS).
SET
!
"
18
All manuals and user guides at all-guides.com
®
LINK
ALARM
as well as
ALARM
and
followed by the STEL alarm setpoint are displayed for
ALARM
and
followed by the TWA alarm setpoint are displayed for
LO,HI,STL,TWA
CAL DUE
OFF
):
" and the hourglass display.
DUE
" and the hourglass display for three seconds.
" display.
?
FAS
", "
" and "
" display.
ALTAIR PRO - Operating Manual
®
Software.
HI
ALARM
and
are displayed alternately for
and
) is enabled via FiveStar LINK software
CAL
DUE
" "
" every minute until
MSA
, H
S or CO).
2
2
ALARM
the
GB
