Philips FC9306 Handleiding pagina 10

Beschikbare talen

English

Tip: We advise you to wrap the hose around the tube to ensure stable parking

and to save even more space when you store the appliance.

maintenance

Always unplug the appliance before you clean the appliance, before you

replace the dustbag and before you replace the filters.

Dustbag

Note: In some cases, the dustbag-full indicator can indicate that the dustbag

is full, even though it is not. This may occur if the pores of the dustbag are

clogged (e.g. when you have vacuumed ashes, fine sand, lime, cement dust and

similar substances) or if something is blocking the nozzle, tube and/or hose.

If the pores of the dustbag are clogged, you have to replace the dustbag, even

if it is not full yet. If the dustbag is not clogged but not full either, something is

blocking the nozzle, tube and/or hose. In this case, do not replace the dustbag

but remove the obstruction.

Make sure you hold the dustbag upright when you lift it out of the

appliance.

All manuals and user guides at all-guides.com

Put the appliance in upright position. To attach the nozzle to the

appliance, insert the ridge on the nozzle into the storage slot.

To ensure stable parking of the telescopic tube, adjust the tube to the

shortest length.

Replace the dustbag as soon as the dustbag-full indicator has changed

colour permanently, i.e. even when the nozzle is not placed on the

floor.

Pull the cover upwards to open it.

Lift the dustbag holder out of the appliance.