Parkside PASD 4 C3 Gebruiksaanwijzing pagina 23
Beschikbare talen
Beschikbare talen
b) Secure the workpiece. A workpiece securely held by a
clamping device or vice is much safer than one held in
your hand .
c)
Hold the power tool firmly. High reaction moments
can occur for brief periods while lightening and
loosening screws .
d) Switch the power off immediately if the tool blocks
while in use. Be prepared for high reaction moments
as these can cause kickback .
e)
While working on the appliance, transporting it or
storing it, always set the rotation direction switch to
the central position (lock position). This prevents the
power tool from starting up unintentionally .
˜ Vibration and noise reduction
To reduce the impact of noise and vibration emission, limit
the time of operation, use low-vibration and low-noise
operating modes as well as wear personal protective
equipment .
Take the following points into account to minimise the
vibration and noise exposure risks:
Only use the product as intended by its design and
these instructions .
Ensure that the product is in good condition and well
maintained .
Use correct accessory tools for the product and ensure
they are in good condition .
GB/IE/NI
23
