Inhoudsopgave
Advertenties
APPENDIXEN
Ondersteunde oOdrachten voor PJLink™
De volgende tabel bevat opdrachten om de projector te bedienen met het PJLink™ protocol.
OOdracht beschrijving oOmerking (Oarameter)
Command
POWR
POWR?
INPT
INPT?
AVMT
AVMT?
ERST?
LAMP?
INST?
NAME?
INF1?
INF2?
INF0?
CLSS?
OOmerkingg:
‡
Deze projector voldoet volledig aan de specificaties van JBMIA PJLink™ Class 1. Hij ondersteunt
alle opdrachten zoals gedefinieerd door PJLink™ Class 1, en de compliantie is geverifieerd met de
PJLink™ standaards-pecificaties Version 1.0.
‡
"XXXXX" hangt in de voornoemde meldingen af van de verschillende modellen.
74
Nederlands
DescriOtion
Power control
Inquiry about the power state
INPT Input switching
Inquiry about input switching
Mute control
Inquiry about the mute state
Inquiry about the error state
Inquiry about the lamp state
Inquiry about the available inputs
Inquiry about the projector name
Inquiry about the manufacturer name
Inquiry about the model name
Inquiry about other information
Inquiry about the class information
Remark (Parameter)
0 = Standby
1 = Power on
0 = Standby
1 = Power on
2 = Cooling down
3 = Warming up
11 = VGA1
12 = VGA2
13 = Component
14 = BNC
21 = VIDEO
22 = S-VIDEO
31 = HDMI 1
32 = HDMI 2
30 = Video and audio mute disable
31 = Video and audio mute enable
1st byte: Fan error, 0 or 2
2nd byte: Lamp error, 0 to 2
3rd byte: Temperature error, 0 or 2
4th byte: Cover open error, 0 or 2
5th byte: Filter error, 0 or 2
6th byte: Other error, 0 or 2
0 to 2 mean as follows:
0 = No error detected, 1 = Warning, 2 = Error
1st value (1 to 5 digits): Cumulative LAMP operating time (This item shows a
lamp operating time (hour) calculated based on that LAMP MODE is LOW.)
2nd value: 0 = Lamp off, 1 = Lamp on
The following value is returned.
"11 12 21 22 31 32"
The projector name set on the NETWORK menu or the ProjectorView
Setup window is returned
"Optoma" is returned.
"XXXXX" is returned.
No other information is available. No parameter is returned.
"1" is returned.
Advertenties
Inhoudsopgave
