Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
ACTIVATING AIRDRY
AirDry improves the drying results with less energy consumption.
By default, AirDry is activated with all programmes excluding
deactivate it.
While the drying phase operates, the device opens the appliance door. The door is then kept
ajar.
While the appliance is in user mode, within about 5 seconds:
1. Press the programme button twice.
•
The indicators
•
The indicator
2. Wait until the indicators
•
The indicator
3. Press the programme button to change the setting.
•
The indicator
4. Press the on/off button to confirm the setting.
CAUTION! If children have access to the appliance, it is advised to deactivate AirDry as
opening the door may pose a danger.
BEFORE FIRST USE
1. Make sure that the current level of the
water softener agrees with the hardness
of the water supply. If not, adjust the level
of the water softener.
2. Fill the salt container.
3. Fill the rinse aid dispenser.
4. Open the water tap.
5. Start a programme to remove any processing
residuals that can still be inside the appliance.
and
are on.
flashes.
and
are off.
is on = AirDry is activated.
is off = AirDry is deactivated.
(if applicable) but it is possible to
Do not use detergent and do not load the
baskets.
After starting a programme, it may take up to 5
minutes for the appliance to recharge the resin in
the water softener. It seems that the appliance is
not working. The washing phase starts only after
this procedure is completed. The procedure is
repeated periodically.
39
Advertenties
Inhoudsopgave
