OPERATION
At least one cooking zone must be active.
1. Touch and hold the pause key until you hear an audio signal.
The indicator light is shown above the pause key.
▷
▷
All displays show the pause symbol.
The pause function is activated.
▷
2. To deactivate the pause function, touch the pause key.
▷
The most right slide control lights up.
3. Within 5 seconds, slide from the left to the right over the right slider control
The indicator light above the pause key goes off.
▷
▷
The pause function is deactivated.
The conditions before the pause are restored.
▷
Recall function
If the hob was switched off accidentally with the on/off key, all settings can be restored using the
recall function.
1. Touch the on/off key within 6 seconds and hold it for 2 seconds.
The pause key flashes.
▷
2. Now immediately touch the pause key.
The previous settings are active again.
▷
Chef Cook function
This function is useful for professional cooking. This function enables you to cook without
making use of the slide controls. You can move the pans around the cooktop and on different
positions, the pans get different power levels. The hob will switch off if the Chef Cook function is
not switched off within 2 hours.
The Chef Cook function comes with preset power levels for three cooking zones; front
left 3, rear left 6, rear right 9. These levels can be modified with the slide control of each
zone. The front right zone is disabled. When the function is deactivated, the zones are
switched off (level 0) and the hob switches off after 10 seconds..
Attention
Grains of sand may cause scratches which cannot be removed. Only put pans with a
clean bottom on the hob. We recommend that you lift pans and not slide them over the
hob.
EN 17