Power Limiter - Pelgrim IK5064F Gebruiksaanwijzing
Verberg thumbnails
Zie ook voor IK5064F:
- Installatievoorschrift (2 pagina's) ,
- Gebruiksaanwijzing (52 pagina's) ,
- Installatievoorschrift (2 pagina's)
Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
POWER LIMITER
Power limiter
Setting the power limiter should only be carried out by a registered and qualified
installer. Please read the safety regulations and the installation instructions
carefully.
The hob is equipped with a power limiter. If the total power of operating cooking zones exceeds
the maximum available amount of power, the power is automatically reduced. The display of the
cooking zone who is being reduced in its power is first flashing; the level is then automatically
reduced to the highest available power.
The limiter is set at 7400W by the factory, but it is possible to change it (see table).
Position of the slide control
0 - 8
1
2
3
4
5
6
7
1. Connect the hob to the power supply.
2. Within two minutes, touch the lock key and the pause key simultaneously until you hear an
audio signal.
You have entered the Service Menu.
▷
3. Touch the two illuminated slider cursors until you hear a second audio signal.
▷
The timer display shows 'CF6'.
4. Touch the pause key.
The timer display shows 'PHA'.
▷
▷
A cooking zone display shows the power level.
5. Use the slide control to select the desired power level.
6. Again, touch the lock key and the pause key simultaneously to confirm the setting.
▷
The hob switches off.
To exit the Service Menu without making any changes, touch the on/off key.
Setting of the power limiter
7400 W (total)
1000 W (total)
1500 W (total)
2800 W (total)
3500 W (total)
3700 W (total)
4500 W (total)
6000 W (total)
EN 19
Advertenties
Hoofdstukken
Inhoudsopgave
