Problems & Solutions; Technical Specifications - Inventum Iov6032Rvs Gebruiksaanwijzing

Inhoudsopgave

Beschikbare talen

Changing the direction of the door

Decide whether you want the oven door to open to the left or right before positioning the appliance in the kitchen cabinet. Follow the

directions below to alter the opening direction of the door.

• Fully open the door.

• Remove the four fixing screws from the door hinge. Hold the door.

• Remove the four plastic caps from the opposite side.

• Rotate the door 180°.

• Secure the door in its new position using the 4 screws removed previously.

NOTE: Make sure that the oven door is perfectly parallel with the front panel. If it is not, adjust it by means of the screws you

have just inserted.

• Install the oven according to the installation instructions.

problems & solutions

Problem

The touch keys don't respond.

The oven lamp is not lit.

The oven is not heating up.

The display of the clock is

flashing.

The control light of the oven

function is not lit up.

- only possible for model IOV6032DRVS

Solution

Unplug the appliance or remove the fuse in the fusebox. Wait a

few minutes before plugging the appliance back in.

Replace the oven lamp according to the instructions.

- Has the correct temperature and oven function been set?

- Is the door of the oven closed properly?

- There has been a power failure. Reset the clock.

- The oven is switched off because the set cooking time and/

or end of the cooking time has passed. Press the central key

CLOCK to end the function and reset the knobs.

- Is an oven function selected?

- Is the beginning of the cooking time delayed? The oven will not

start until it reaches the set time.

English

•

Inhoudsopgave

Iov6032drvs