Turbo Heating; Switch Off The Product; Frost Protection Function; Use The Heating Fan Only - SilverCrest SOR 2400 D2 Bedienings- En Veiligheidsinstructies
Verberg thumbnails
Zie ook voor SOR 2400 D2:
- Bedienings- en veiligheidsinstructies (53 pagina's) ,
- Bedienings- en veiligheidsinstructies (113 pagina's)
Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
NOTES:
The power indicator
heat level switch
[
2 ]
The power indicator
heat level switch
[
2 ]
˜ Turbo heating
To heat the room more quickly, set the
temperature control
to 3 .
level switch
[
2 ]
Press the heating fan switch
"I" to switch on the heating fan . An indicator
in the heating fan switch
Hot air will be blown through the heating
fan
.
[
5 ]
To switch off the heating fan
heating fan switch
Using the temperature control
product to the desired temperature .
˜ Switch off the product
Press the heating fan switch
to switch off the heating fan
Turn the temperature control
heat level switch
2 ]
[
Remove the mains plug from the mains
socket .
lights up when the
1 ]
[
is turned to 1, 2 or 3 .
goes off when the
1 ]
[
is turned to 0 .
to . and the heat
3 ]
[
to position
[
4 ]
will light up .
4 ]
[
, press the
[
5 ]
to 0 position .
4 ]
[
to set the
[
3 ]
to position 0
[
4 ]
.
[
5 ]
to
and the
3 ]
[
to 0 .
˜ Frost protection function
The frost protection function
automatically controls the product to
keep the room temperature above
7 °C, steps are as follows:
Connect the product to an earthed mains
socket protected by a residual current circuit
breaker .
Switch on the product by setting the
heat level switch
[
2 ]
and by setting the temperature control
. The product switches on when the room
temperature is approx . 7 °C . As soon as
the room temperature is above 7 °C, the
product automatically switches off again .
NOTE: The product will switch itself on and
off automatically to maintain a temperature
higher than 7 °C .
˜ Use the heating fan only
To use the heating fan
product, steps are as follows.
Connect the product to an earthed mains
socket protected by a residual current circuit
breaker .
Press the heating fan switch
to switch on the heating fan
in the heating fan switch
Hot air will be blown through the heating
fan
.
5 ]
[
To switch off the heating fan
heating fan switch
NOTE: The heating fan works
independently from the power indicator
heat level switch
2 ]
[
control
.
[
3 ]
to either 1, 2 or 3
3 ]
[
only on the
5 ]
[
to position I
4 ]
[
. An indicator
[
5 ]
will light up .
[
4 ]
, press the
5 ]
[
to 0 position .
4 ]
[
1 ]
[
and temperature
GB/IE/NI
to
,
13
Advertenties
Hoofdstukken
Inhoudsopgave
