Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
• Activation/deactivation of the PIN code
1-
appears on the display.
Press
or
to enabled PIN code.
appears on the display.
= PIN code enabled
= PIN code disabled
2- Press
to save and return to the home installer settings display.
The PIN code is enabled. Any modification of reserved settings listed in
"Overview" is now impossible.
• Customizing the PIN code
If you have just activated the PIN code, follow the steps described below.
Alternatively, you must copy the steps 1 and 2 of the initialisation process
as well as the steps 1 and 2 of the activation process before personalising
the PIN code.
Please remember that the personalisation of the PIN code can only be set
once the initialisation and activation of the PIN code has been completed.
1- When
appears, press
2- The 0000 code appears and the first number blinks. Press
to select the first desired number then press
operation for the remaining 3 numbers.
Cod. 1910000000276 - nv01
for at least 5 seconds.
5 sec.
to save. Repeat this
3- Press
to confirm. The new code is now saved.
4- Press again on
home display of the installer settings.
To exit the installer setting, press
13.4 Restoring factory settings
If the PIN code protection is disabled, the user and installer settings are
reinitialized:
1- From the PIN code setting, press
display
or
2-
Appears . Press
= Factory settings reset.
= Factory settings not reset
- 33 -
1
to exit setting PIN code mode and go back to the
twice.
.
appears briefly on the
or
to select
.
English
2
Advertenties
Hoofdstukken
Inhoudsopgave
