Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Removing and cleaning the wire guides
WARNING!
After cleaning, re-tighten the screws on the guides with a screwdriver.
When replacing the wire guides, make sure you mount them on the same side they were
installed on prior to removal.
34
1
Undo the screw. Use a screwdriver.
2
Remove the guides from the holes in the
back wall.
INFORMATION!
Take care not to lose the spacers fitted
on the wire guides. Replace the spacers
after cleaning; otherwise, sparks may
appear.
Advertenties
Hoofdstukken
Inhoudsopgave
