Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Clean the contacts on the battery/rechargeable battery and in the battery
compartment before inserting!
Remove exhausted batteries/rechargeable batteries from the product immediately.
˜ Thermometer/Hygrometer
The product features has a digital display at the 6 o'clock position, which shows
the temperature and humidity alternatingly in 20-second intervals.
After unpacking the product and inserting the battery: It may take some time
before the temperature and humidity sensors have adjusted to their new
surroundings and correct values are displayed.
˜ Before initial use/Inserting and replacing a battery
Turn the product over. Place the product on a soft underlay to avoid scratching the
surface.
Hold the front side of the product in one hand and the back cover
other hand. Turn the back cover in a counter-clockwise direction until the arrow is
facing the 10 o'clock position (as seen at the back) and matching the arrow on
the front side (fig. C).
Remove the back cover
placing first the – contact and then pushing down at the + contact.
Place back the back cover
on the back cover.
Note: Pay attention to the correct seating of the sealing ring. The IP protection is
otherwise not guaranteed.
Turn the back cover
hole
on the top.
1 ]
[
The product is now ready for use.
12 GB/IE/NI
. Insert the battery into the battery compartment
3 ]
[
with the arrow of the front side matching the one
3 ]
[
in a clockwise direction until it matches the mounting
3 ]
[
with the
3 ]
[
,
7 ]
[
Advertenties
Hoofdstukken
Inhoudsopgave
