Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Note: Within 4 minutes, the hands will move to 12 o'clock. The reception of the
radio signal is initiated once all the hands have moved to the 12 o'clock position.
After 3 to 10 minutes, the product will receive the signal and set itself to the exact
time.
Starting reception of the radio signal manually: Press and hold the REC button
at least 5 seconds. The product attempts to receive the radio signal. This process
takes a few minutes to complete.
Notes:
Press the REC button
If the product was not able to receive the radio signal because of errors, e.g.
due your location to being at too great a distance from the time signal transmitter
or for other reasons, you can set the time manually. The manually set value is
overwritten as soon as reception of the radio signal is successful.
For products intended for Latvia, Romania, Cyprus, Bulgaria, Finland and Greece
the display stops at "01:00".
˜ Setting the time manually
(Fig. B)
Press and hold the SET button
manual mode.
Press and hold the SET button
for you to set the time.
Briefly pressing the SET button
enable you to set the current time manually.
Notes:
Press the SET button
After 8 seconds without pressing the SET button
manual mode and keeps the time as normal. The manually set value is overwritten
as soon as the reception of the radio signal is successful.
with a pointed object (e.g. pencil).
5 ]
[
at least 3 seconds. The product switches into
6 ]
[
again until the hands reach the correct position
6 ]
[
moves the hands forward in one minute steps to
6 ]
[
with a pointed object (e.g. pencil).
6 ]
[
, the product switches out of
6 ]
[
GB/IE/NI
5 ]
[
15
Advertenties
Hoofdstukken
Inhoudsopgave
