Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Porous, matte or uneven surfaces are not suitable (for example: Tiles with a relief
pattern or terracotta) .
To achieve a stronger connection, wet the suctions cups before attaching the product
and clean the surface on which you intend to attach the product .
To remove the product, release all suction cups first (for example, by inserting a
fingernail under the rim of each suction cup) .
˜ Operation
˜ Receiving the DCF radio time signal
Insert a 1 .5 V AA / LR6 battery with the correct polarity into the battery
compartment on the back of the product .
The wall clock automatically starts to search for the DCF radio time signal . This
process takes about 3 to 12 minutes to complete .
Within 4 minutes, the hands will move to 12 o'clock . The radio signal reception is
initiated once all the hands have moved to the 12 o'clock position . After 3 to 10 minutes,
the clock will receive the signal and set itself to the exact time .
The reception of the DCF radio time signal by the wall clock can also be started
manually .
Press and hold the REC button 3 at least 5 seconds . The wall clock attempts to
receive the DCF radio time signal . This process takes a few minutes to complete .
Note: If the wall clock was not able to receive the DCF radio time signal because of
errors, e .g . due your location to being at too great a distance from the transmitter or for
other reasons, you can set the time manually . The manually set value is overwritten as
soon as reception of the DCF radio time signal is successful .
Note: For products in tended for Latvia, the display stops at "01:00" .
12
GB/IE/NI
Advertenties
Hoofdstukken
Inhoudsopgave
