Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
˜ Setting the time manually
Press and hold the SET button 4 at least 3 seconds . The wall clock switches into
manual mode .
Press and hold the SET button 4 again until the hands reach the correct position for
you to set the time .
Briefly pressing the SET button 4 moves the hands forward in one minute steps to
enable you to set the current time manually .
Note: After 8 seconds without pressing the SET button 4 , the wall clock switches out
of manual mode and keeps the time as normal . The manually set value is overwritten as
soon as the reception of the DCF radio time signal is successful .
˜ Resetting the settings
Press the RESET button 2 to reset the radio clock settings . Alternatively, remove the
battery from the product and insert it again . The product now automatically starts to
search for the DCF radio time signal .
Note: Press RESET button 2 with a pointed object (e .g . pencil) .
˜ Cleaning and care
The product should only be cleaned on the outside with a soft dry cloth .
If the wall clock is not going to be used, remove the battery .
GB/IE/NI
13
Advertenties
Hoofdstukken
Inhoudsopgave
