Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
TIPS & TROUBLESHOOTING
• Install energizer where it can get plenty of sunlight.
• Install solar energizers on a post above the ground.
• Keep solar panel clean - periodically use a soft cloth with water and a mild
detergent.
• Test voltage on the fence using a Gallagher Fence Volt Meter (G50301).
• Turn energizer off before handling fence or battery connections.
Symptom
Battery
indicator
flashes red
No voltage on
fence
10
3E5459 Gallagher S40 Solar Energizer User Manual
Problem
Battery capacity is
low due to insufficient
sunlight. The energizer
will slow down to use less
power and allow battery
to charge.
Energizer may have been
damaged by lightning.
Solutions
• Ensure energizer is getting
enough sun.
• Turn energizer off for 3
days leave in sun to charge
battery.
Check energizer isn't faulty;
• disconnect from fence and
earth
• measure across fence and
earth terminals with a
Gallagher Fence Volt Meter
- if less than 5 kV
return energizer for
service
- if more than 5 kV the
fault is with the fence
or earth system.
Advertenties
Inhoudsopgave
Probleemoplossen
