Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Translation of the original instructions
• Regularly take off the cover and remove dust with an air gun.
• Under no circumstances should solvents or other aggressive
• Clean the device's surfaces with a soft, dry cloth.
Regulations
• The device complies with European Directive.
• The certificate of compliance is available on our website.
• EAC conformity mark (Eurasian Economic Commission)
• Equipment in compliance with British requirements. The Brit-
• Equipment in conformity with Moroccan standards.
• The declaration C( مCMIM) of conformity is available on our
Disposal:
• This product should be disposed of at an appropriate recycling
GENERAL DESCRIPTION
The STARTIUM range is designed to charge and start all common batteries including lead-acid , electrolyte or gel
batteries, 12V et 24V.
Assembling the handle and the wheels (only for 480E, 680E and 980E) :
POWER SUPPLY
Check that the power supply and its protection (fuses) are compatible with the current required by the machine. The
device must be positioned so that the socket is easily accessible. The machine must be connected to a socket WITH
earth according to the following recommendations:
Mains voltage
Protection
Charging
charge
power
Starting
*In the event that starting a HGV proves difficult , use a 20A plug (optional).
The recommended cross-section for an extension is : 3 x 2,5 mm².
14
STARTIUM 330E / 480E / 680E / 980E
Take the opportunity to have a qualified person check the elec-
trical connections with an insulated tool.
cleaning agents be used.
ish Declaration of Conformity is available on our website (see
home page).
website (see cover page).
facility. Do not dispose of in domestic waste.
STARTIUM 330E
230V - 1 ph
16 A
800 W
6 500 W
STARTIUM 480E
STARTIUM 680E
230V - 1 ph
16 A
1 700 W
9 000 W
STARTIUM 980E
230V - 1 ph
230V - 1 ph
16 A
2 000 W
2 000 W
10 000 W
12 000 W
EN
16 A*
Advertenties
Inhoudsopgave
